 | Up a level |
A.H. Diallo, Yousif (2022) Discussion of “An updated skeleton void ratio for gravelly sand mixtures considering the effect of grain size distribution”. Canadian Geotechnical Journal, 59 (11).
A.H. Diallo, Yousif (2021) Discussion of “Influence of particle-size distribution homogeneity on shearing of soils subjected to internal erosion”. Canadian Geotechnical Journal, 58. pp. 151-153.
A.H. Diallo, Yousif (2021) Discussion of “Threshold fines content and behavior of sands with nonplastic silts”. Canadian Geotechnical Journal, 58 (1). pp. 147-148.
A.H. Diallo, Yousif (2019) Influence of particle-size distribution homogeneity on shearing of soils subjected to internal erosion. Canadian Geotechnical Journal. pp. 1-41. ISSN 00083674
Abdul Nariman, Nazim (2019) Application of coupled XFEM-BCQO in the structural optimization of a circular tunnel lining subjected to a ground motion. Frontiers of Structural and Civil Engineering, 13. pp. 1495-1509. ISSN 20952430
Abdul Nariman, Nazim (2021) Optimum Design of Flexural Strength and Stiffness for Reinforced Concrete Beams Using Machine Learning. Applied Sciences, 11 (18).
Abdul Nariman, Nazim and Ibrahim Mohammed, Ilham and Nooraddin, Glena and Simko, Tavi (2022) Failure Control of an Electric Transmission Tower System under Strong Earthquakes. Eurasian Journal of Science and Engineering, 8 (1).
Abdul Nariman, Nazim and Ibrahim Mohammed, Ilham and Othman Ahmed, Kaywan and Dilshad, Diyako and Khidr, Ibrahim (2021) Analysis of stiffness and flexural strength of a reinforced concrete beam using an invented reinforcement system. Frontiers of Structural and Civil Engineering. pp. 1-16.
Abdullah Hussein, Twana and Oztas, Ahmet (2020) Effect of Using Building Maintenance Information Management System in Maintenance Process in Ministry of Education. Kurdistan Journal of Applied Research, 5 (2). pp. 24-35. ISSN 24117684
Abdullah Saleh, Shalaw and Jalal Khoshnaw, Ganjeena (2020) Effect of Soil Stabilization on Subgrade Soil Using Cement, Lime and Fly Ash. Eurasian Journal of Science & Engineering, 6 (2). pp. 39-52. ISSN 24145629
Abdulmajeed Mamhusseini, Asmaa (2020) Construction of Waste Plastic Roads Using Black Viscous Blend of Hydrocarbons. Eurasian Journal of Science & Engineering, 6 (1). pp. 121-128. ISSN 24145629
Abdulmajeed Mamhusseini, Asmaa (2020) Design and Construction of Deep Excavations. Eurasian Journal of Science & Engineering, 6 (1). pp. 75-88. ISSN 2414-5629
Abdulmajeed Mamhusseini, Asmaa (2020) The Effect of Crumb Rubber on Asphalt Concrete. Eurasian Journal of Science & Engineering, 6 (2). pp. 53-63. ISSN 24145629
Ahmad Amin, Abdulfattah (2018) Evaluation of Wastewater Characteristics in the Urban Area of Sulaimanyah Governorate in Kurdistan-Iraq. Eurasian Journal of Science and Engineering, 4 (1). pp. 12-17. ISSN 24145629
Ahmed Hamza, Araz and Shawkat Mizzouri, Nashwan and Qarani Aziz, Shuokr and Muhammad Hawez, Dara and Braim Hassan Manguri, Shwana and Othman Ahmed, Kaywan and Mohammed Ali, Sazan (2023) GIS Visualization of Solid Waste Disposal Sites and Environmental Impacts in Kurdistan Region-Iraq. Eurasian Journal of Science and Engineering, 8 (3).
Ahmed Hussein, Taman and Jalal Khoshnaw, Ganjeena (2021) Impact of Nano Materials on the Properties of Asphalt Cement. Eurasian Journal of Science and Engineering, 7 (1). pp. 155-162. ISSN 24145629
Ahmed Hussein, Twana (2022) A Review of the Combined Effect of Fibers and Nano Materials on the Technical Performance of Mortar and Concrete. Sustainability.
Akdeniz, Cemil (2016) Applications Of Geographic Information Systems In Construction Management. Second International Engineering Conference On Developments in Civil & Computer Engineering Applications 2016.
Akdeniz, Cemil (2016) Contemporary Approaches to Construction Management Education. Eurasian Journal of Science & Engineering, 1 (2). ISSN 2414-5629
Ali, Barham (2020) A Critical Review on the Influence of Fine Recycled Aggregates on Technical Performance, Environmental Impact and Cost of Concrete. Applied Sciences, 10 (3). pp. 1-24.
Ali Mohammed, Sazid and Shakor, Pshtiwan and S, Sathvik and Rauniyar, Abishek and Krishnaraj, L. and Kumar Singh, Atul and Laghi, Vittoria (2023) An environmental sustainability roadmap for partially substituting agricultural waste for sand in cement blocks. Frontiers in Built Environment, 9.
Ameen, B M and Salim Al-Numan, Bayan (2021) Corrosion rate of reinforced concrete incorporating recycled concrete aggregates. The 2nd International Seminar on Civil and Environmental Engineering (ISCEE 2021).
Fadhil Hama, Mohammed and Ibrahim Mohammed, Ilham (2021) Application of Lock-In Thermography for Detecting Leakage Defects in Historic Masonry Arch Structures. Eurasian Journal of Science and Engineering, 7 (1). pp. 134-154. ISSN 24145629
H. Ali, Barham (2019) CBR Properties of Sand Mixed with Modified Waste Expanded Polystyrene Foams (EPS). Eurasian Journal of Science and Engineering, 4 (4). pp. 58-67. ISSN 24145629
H. Younis, Khaleel (2021) Mechanical and Fracture Parameters of Ultra-High Performance Fiber Reinforcement Concrete Cured via Steam and Water: Optimization of Binder Content. Materials, 14 (8). pp. 1-18. ISSN 19961944
H. Younis, Khaleel (2021) Mechanical properties and ductility behavior of ultra-high performance fiber reinforced concretes: Effect of low water-to-binder ratios and micro glass fibers. Ain Shams Engineering Journal. pp. 1-11.
H. Younis, Khaleel (2020) Mechanical properties and fracture parameters of ultra high performance steel fiber reinforced concrete composites made with extremely low water per binder ratios. SN Applied Sciences.
H. Younis, Khaleel (2018) Nano-Silica Modified Recycled Aggregate Concrete: Mechanical Properties and Microstructure. Eurasian Journal of Science & Engineering, 3 (3). pp. 167-176. ISSN 2414-5629
H. Younis, Khaleel (2020) Recycled Aggregate Concrete Made with Silica Fume: Experimental Investigation. Civil Engineering and Architecture, 8 (5). pp. 1136-1143. ISSN 23321091
H. Younis, Khaleel (2020) Recycled Aggregate Concrete including Various Contents of Metakaolin: Mechanical Behavior. Advances in Materials Science and Engineering. pp. 1-17. ISSN 16878434
H. Younis, Khaleel (2020) Statistical Analysis and Prediction Models for Performance of Re-mixed Concrete in Hot Climate Regions. International Journal of Emerging Trends in Engineering Research, 8 (8). pp. 4178-4184.
H. Younis, Khaleel and S. Ahmed, Fatima and B. Najim, Khalid (2018) Self-Compacting Concrete Reinforced with Steel Fibers from Scrap Tires: Rheological and Mechanical Properties. Eurasian Journal of Science and Engineering, 4 (1). pp. 1-11. ISSN 24145629
H.Younis, Khaleel (2021) Strength, abrasion resistance and permeability of artificial fly-ash aggregate pervious concrete. Case Studies in Construction Materials, 12. pp. 1-15. ISSN 22145095
Haidar Ali, Barham (2018) Experimental Study on Hardened Properties of High Strength Concretes Containing Metakaolin and Steel Fiber. Eurasian Journal of Science and Engineering, 3 (3). pp. 102-112. ISSN 24145629
Hassan Fahmi Rasheed, Mereen and Essa, Saad (2018) Effect of Steel Reinforcement on the Minimum Depth-Span Ratio. Eurasian Journal of Science and Engineering, 3 (3). pp. 66-74. ISSN 24145629
Hassan Fahmi Rasheed, Mereen and Rashied Ahmed, Faris and Hamid Mohammed, Alameen (2019) Analysis of Steel Communication Towers in Iraq Under the Effect of Seismic Loading. Eurasian Journal of Science and Engineering, 5 (1). pp. 36-47. ISSN 24145629
Himdad Majeed, Hozan and Salim Al-Numan, Bayan (2019) Comparative Study of Current Methods of Analysis of R.C. Structural Frames Based on Pushover Analysis. Eurasian Journal of Science and Engineering, 5 (1). pp. 18-24. ISSN 24145629
I. Mohammed, Ilham and Abdul Nariman, Nazim and Othman Ahmed, Kaywan and Ali, Sarhad and Mohammed, Peshwaz and Samad, Sirwan (2020) Utilization of Waste Plastic and Waste Glass Together as Fine and Coarse Aggregate in Concrete. Eurasian Journal of Science & Engineering, 6 (2). pp. 1-10. ISSN 24145629
I. Mohammed, Ilham and Abdul Nariman, Nazim and Shakor, Pshtiwan and Ismail, Osama and Rizgar, Kozhin (2023) Post-Fire Mechanical Properties of Concrete Incorporating Waste EPS (Styrofoam) as Aggregate Replacement. CivilEng, 4 (2). pp. 359-372.
Ibrahim Mohammed, Ilham (2015) The Effect of Nano-Materials on Hot Mixture “Asphalt-Concrete”. Open Journal of Civil Engineering, 5 (4).
Ismael, Adnan and Hussein, Hamid and Tareq, Mohammed and Gunal, Mustafa (2017) Simulation of Three-Dimensional Flow Field around Unconventional Bridge Piers. Eurasian Journal of Science and Engineering, 3 (2). pp. 90-99. ISSN 24145629
Jalal Khoshnaw, Ganjeena (2017) Engineering and Microstructures Characteristics of Low Calcium Fly Ash Based Geopolymer Concrete. Eurasian Journal of Science & Engineering, 2 (2). pp. 27-39. ISSN 2414-5629
Jalal Khoshnaw, Ganjeena and Haidar Ali, Barham (2019) EXPERIMENTAL STUDY ON PERFORMANCE OF RECYCLED AGGREGATE CONCRETE: EFFECT OF REACTIVE MINERAL ADMIXTURES. IJCIET INTERNATIONAL JOURNAL OF CIVIL ENGINEERING AND TECHNOLOGY (IJCIET), 10 (1). pp. 2566-2576.
Jalal Madhat Khowshnaw, Ganjeena (2020) Experimental Study on Hardened and Transport Properties of Previous Concretes. Polytechnic Journal, 10 (1). pp. 121-125. ISSN 23135727
Jalal Madhat Khowshnaw, Ganjeena (2020) Experimental Study on Hardened and Transport Properties of Previous Concretes: Effect of Elevated Temperature Curing Regime. Polytechnic Journal, 10 (1). pp. 121-125.
Jalal Madhat Khowshnaw, Ganjeena and Mustafa Salih Zebari, Salman (2019) Evaluation and Performance of Fly Ash in Porous Asphalt by Using Two Sources of Asphalt Binder. Eurasian Journal of Science and Engineering, 4 (4). pp. 122-134. ISSN 24145629
Jalal Nareeman, Barham and Othman Ahmed, Kaywan and Hama Karim, Peshang (2023) Assessment Of Water Supply System: A Questioner Study. Eurasian Journal of Science and Engineering, 9 (2).
Jamal Hamasalh, Baban and Jalal Khoshnaw, Ganjeena (2020) Fresh Properties of Lightweight Concrete and Lightweight Self Compacting Concrete Produced with Pumice Aggregate. Eurasian Journal of Science & Engineering, 6 (2). pp. 11-20. ISSN 24145629
K. Alfaris, Seema (2022) The Green Network Panoramic Vision Erbil City as a Case Study. Cihan University-Erbil Scientific Journal (CUESJ), 6 (2).
K. Jalal, Nawzad and A. A. Masih, Dawa and A. Mustafa, Sulaiman (2023) Acoustical Evaluation and Comparison Between Two Classroom Types in Erbil. Eurasian Journal of Science and Engineering, 9 (1).
Kameran Ahmed, Junaid (2021) Some Properties of Concrete Made with Wood Fibers. Eurasian Journal of Science and Engineering, 7 (1). pp. 106-113. ISSN N 24145629
Kameran Ahmed, Junaid and M.E. Taha, Omer and H. Ali, Barham and Tareq, Mohammed (2016) The Effect Of Fiber Orientation And Number Of Layer On The Natural Frequency Of Composite Laminated Plate. Second International Engineering Conference On Developments in Civil & Computer Engineering Applications 2016.
Kameran Ahmed, Junaid and Salim Al-Numan, Bayan (2022) Investigation of Using Human Hair as Fiber Reinforcement in Concrete. Eurasian Journal of Science and Engineering, 7 (2). pp. 194-200. ISSN 2414-5629
Kameran Ahmed, Junaid and Salim Al-Numan, Bayan (2023) Properties Of Lightweight Concrete Made Of Recycled Wood Wastes. Eurasian Journal of Science and Engineering, 9 (2).
Kameran Ahmed, Junaid and Tareq Shukri, Mohammed (2017) Comparison between Destructive and Non-Destructive Test on Concrete. Eurasian Journal of Science and Engineering, 3 (2). pp. 215-223. ISSN 24145629
L. Salman, Eman (2016) Environmental Pollution and Impacts of Dust Storms on the Traffic Safety. Second International Engineering Conference On Developments in Civil & Computer Engineering Applications 2016.
Latif, Shkar and Salim Al-Numan, Bayan and Mulapeer, Esamaddin (2020) Rheological Behavior of Recycled Fiber Reinforced Self-Compacted Concrete with Recycled Coarse Aggregate. Eurasian Journal of Science & Engineering, 6 (1). pp. 17-26. ISSN 2414-5629
M. Ahmed, Thamir (2020) Effects of Dam Gate Geometry on Pressure Variation Aided by Map Presentation. Polytechnic Journal, 10 (2). pp. 44-52. ISSN 23135727
M. Ahmed, Thamir (2016) Effects of Gate Geometries on Top Pressure Coefficient of Dam Tunnel Gate. Second International Engineering Conference On Developments in Civil & Computer Engineering Applications 2016.
M. Ahmed, Thamir (2017) Effects of Gate Lip Shapes on Hydrodynamic Forces on Gate Dam Tunnels. Eurasian Journal of Science and Engineering, 3 (2). pp. 47-57. ISSN 24145629
M. Ahmed, Thamir (2016) Effects of Increasing the Base on Concrete Dam Stability. Eurasian Journal of Science and Engineering, 2 (1). pp. 10-20. ISSN 24145629
M. Ahmed, Thamir (2016) Effects of Soil Properties of Alum Sludge Inporporated Concrete. Eurasian Journal of Science & Engineering, 1 (2). ISSN 2414-5629
M. Ahmed, Thamir (2016) Experimental Investigation on Pressure Coefficients along Bottom Surface of Dam Tunnel Gate With aid of Mapping Presentations. Second International Engineering Conference On Developments in Civil & Computer Engineering Applications 2016.
M. Ahmed, Thamir (2016) Experimental Study of Pressure Coefficient along Inclined Bottom Surface of Dam Tunnel Gate. Eurasian Journal of Science & Engineering, 1 (2). ISSN 2414-5629
M. Ahmed, Thamir (2022) Parametric Study of Concrete Dam Stability in the Case of Gallery and Tailwater Existence. Eurasian Journal of Science & Engineering, 7 (2). pp. 107-120. ISSN 2414-5602
M. Ahmed, Thamir (2020) Parametric Study of Filter Lengths Effect on Stability of Earth Dams. Eurasian Journal of Science & Engineering, 6 (1). pp. 56-74. ISSN 2414-5629
M. Ahmed, Thamir (2016) Prediction Of Pressure Coefficients For Flat Lip Vertical Gates. Second International Engineering Conference On Developments in Civil & Computer Engineering Applications 2016.
M. Ahmed, Thamir (2016) Pressure Coefficients of Curved Lip of Vertical Lift Gate in Dam Tunnels. Eurasian Journal of Science and Engineering, 2 (1). pp. 1-6. ISSN 24145629
M. Ahmed, Thamir and O. Anwar, Awat (2017) Effects of Tunnel Dam Gate Lip Geometries on Downpull Force Coefficients. Eurasian Journal of Science and Engineering, 3 (2). pp. 247-257. ISSN 24145629
M. Ahmed, Thamir and Salim Al-Numan, Bayan (2018) Application of a Proposed Sustainability Checklist for Construction Projects. Eurasian Journal of Science and Engineering, 3 (3). pp. 160-166. ISSN 24145629
M. Ahmed, Thamir and Salim Al-Numan, Bayan (2018) Proposed Sustainability Checklist for Construction Projects. Eurasian Journal of Science and Engineering, 3 (3). pp. 154-159. ISSN 24145629
M. Fadhil Al-Quraishi, Ayad (2020) Color slices analysis of land use changes due to urbanization in a city environment of Miami Area, South Florida, USA. Modeling Earth Systems and Environment, 7. pp. 537-546.
M. Fadhil Al-Quraishi, Ayad (2021) Drought trend analysis in a semi-arid area of Iraq based on Normalized Difference Vegetation Index, Normalized Difference Water Index and Standardized Precipitation Index. Journal of Arid Land, 13 (4). pp. 413-430. ISSN 1674-6767
M. Jassim, Hamed (2020) Chert Deposit Used in Cement Production as a Quartz-Sand Alternative in the Iraqi Kurdistan Region: An Assessment Study. Geotechnical and Geological Engineering.
M. Maruf, Shelan (2020) Thermal Properties and Magnetic Susceptibility of Hellmann Potential in Aharonov–Bohm (AB) Flux and Magnetic Fields at Zero and Finite Temperatures. Civil Engineering and Architecture, 8 (5). pp. 1136-1143.
M. Mohammed Salih, Haval (2016) RESIDENTIAL BUILDING DEVELOPMENT PROCESS IN KURDISTAN REGION GOVERNMENT. Second International Engineering Conference On Developments in Civil & Computer Engineering Applications 2016.
M. RAJAB, SHAYMA and H. KARIM, TARIQ (2023) EFFECTS OF ROCK FRAGMENT ARCHITECTURE ON SOME SELECTED SOIL PROPERTIES IN A SEMIARID ENVIRONMENT. The Seybold Report Journal, 18 (1).
Manguri, Ahmed and Saeed, Najmadeen and Mahmood, Aram and Katebi, Javad and Jankowski, Robert (2022) Optimal reshaping and stress controlling of double-layer spherical structures under vertical loadings. Archives of Civil Engineering, 68 (4). pp. 591-606.
Manguri, Ahmed and Saeed, Najmadeen and Szczepanski, Marcin and Jankowski, Robert (2023) Buckling and shape control of prestressable trusses using optimum number of actuators. Scientific Reports, 13.
Mohammed Sami Al-Janabi, Ahmed (2021) Prediction of daily water level using new hybridized GS-GMDH and ANFIS-FCM models. Engineering Applications of Computational Fluid Mechanics, 15 (1).
Muhie Eldeen Taha, Omer and Kameran Ahmed, Junaid and H. Ali, Barham and Taraq, Mohammed (2016) Use of Plastic Waste in Gypseous Soil Reinforcement. Second International Engineering Conference On Developments in Civil & Computer Engineering Applications 2016.
Mustafa Shukur, Shaaban and Yahya, Hafedh (2023) Preference Study Environment of Group Study Room in University Library (A Case Study at Tishk International University Library). Eurasian Journal of Science and Engineering, 9 (1).
N. S, Sivakumar and A. S., Brwa (2019) Optimization Of Process Parameters For Drilling Frp And Analyzing Cracks In Drilled Laminates. International Journal of Mechanical and Production Engineering Research and Development, 9 (5). pp. 1129-1140. ISSN 22496890
Osman, K. (2019) Simulation of blockage efects on scouring downstream of box culverts under unsteady fow conditions. International Journal of Environmental Science and Technology, 16. pp. 5305-5310. ISSN 17351472
Othman Ahmed, Kaywan (2021) The Effectiveness of Social Media on Engineers Related Tasks. Journal of Studies in Science and Engineering, 1 (2).
Othman Ahmed, Kaywan (2021) Impact of COVID-19 Pandemic on Hand Washing Process and Water Consumption. Eurasian Journal of Science & Engineering, 7 (1). pp. 228-245. ISSN 24145629
Othman Ahmed, Kaywan and Abdullah Saleh, Shalaw (2022) Impact of Covid-19 Pandemic Quarantine on Civil Engineers’ Performance and Projects’ Construction Delay. Eurasian Journal of Science and Engineering, 8 (1).
Othman Ahmed, Kaywan and Ahmed Hussein, Twana (2022) CONTEMPORARY TRENDS TOWARD ENVIRONMENTAL ISSUES IN THE KURDISTAN REGION OF IRAQ. Prace i Studia Geograficzne.
Puzatova, Anastasia and Shakor, Pshtiwan and Laghi, Vittoria and Dmitrieva, Maria (2022) Large-Scale 3D Printing for Construction Application by Means of Robotic Arm and Gantry 3D Printer: A Review. Buildings, 12 (11).
Q. Ali, Mohammed and Jalal Khoshnaw, Ganjeena (2020) Influences of polymer modifiers on Porous Hot Asphalt Mixture Property and Durability. Polytechnic Journal, 10 (2). pp. 126-131.
S, Sathvik and Shakor, Pshtiwan and Hasan, Sarwar and Osita Awuzie, Bankole and Kumar Singh, Atul and Rauniyar, Abishek and Karakouzian, Moses (2023) Evaluating the potential of geopolymer concrete as a sustainable alternative for thin white-topping pavement. Frontiers in Materials, 10.
S. Brwa, Ahmed and Ahmed Hussein, Twana and Haydar, Barham and Kumar, Siva (2020) Performance Based Time History Analysis of Five Story Shear Frame Building Using MATLAB and ETABS. Eurasian Journal of Science & Engineering, 6 (1). pp. 184-198. ISSN 24145629
S. Shareef, Sardar and Latif Rauf, Hozan (2022) Using Hemp for Walls as a Sustainable Building Material. Journal of Studies in Science and Engineering, 2 (4). pp. 17-24.
Saadulla, Hardi and Ibrahim Mohammed, Ilham and Sani, Ashiru (2019) Using Pavement Condition Index to Evaluate the Condition of Flexible and Rigid Pavements. Eurasian Journal of Science and Engineering, 4 (4). pp. 110-121. ISSN 24145629
Saeed, Najmadeen (2022) The Effect of Openings’ Size and Location on Selected Dynamical Properties of Typical Wood Frame Walls. Polymers, 14 (3). pp. 1-14.
Saeed, Najmadeen (2022) Non-Linear Analysis of Structures Utilizing Load-Discretization of Stiffness Matrix Method with Coordinate Update. Applied Sciences, 12 (5).
Saeed, Najmadeen and A. Manguri, Ahmed and Szczepanski, Marcin and Jankowski, Robert and H. Ali, Barham (2022) Static Shape and Stress Control of Trusses with Optimum Time, Actuators and Actuation. International Journal of Civil Engineering. pp. 379-390.
Saeed, Najmadeen and Katebi, Javad and Manguri, Ahmed and Mahmood, Aram and Szczepanski, Marcin and Jankowski, Robert (2022) Using Minimum Actuators to Control Shape and Stress of a Double Layer Spherical Model Under Gravity and Lateral Loadings. Advances in Science and Technology Research Journal, 16 (6). ISSN 2299-8624
Salim Al-Numan, Bayan (2016) Assessment of Strengthening Scheme of Existing Buildings Extended by Adding Additional Floors. Eurasian Journal of Science and Engineering, 2 (1). pp. 28-40. ISSN 24145629
Salim Al-Numan, Bayan (2015) Compressive Strength Formula for Concrete using Ultrasonic Pulse Velocity. International Journal of Engineering Trends and Technology, 26 (1).
Salim Al-Numan, Bayan (2021) Critical Evaluation for Grading and Fineness Modulus of Concrete Sands used in Sulaymaniyah City-Iraq. Journal of Engineering, 27 (10).
Salim Al-Numan, Bayan (2016) Effect Of Increasing Columns Concrete Strength On Columns Reinforcement Ratio In High Rise Buildings. Second International Engineering Conference On Developments in Civil & Computer Engineering Applications 2016.
Salim Al-Numan, Bayan (2016) Effect of Aggregate content on the concrete compressive strength-ultrasonic pulse velocity relationship. American Journal of Civil Engineering and Architecture, 4 (1). pp. 1-5.
Salim Al-Numan, Bayan (2015) Experimental Time-Dependent Deflection of High Strength Concrete Panels. American Journal of Civil Engineering and Architecture, 3 (5). pp. 153-157.
Salim Al-Numan, Bayan (2016) Load-Deflection Behavior and Failure Modes of CFRP Strengthened Reinforced Concrete Beams. Eurasian Journal of Science & Engineering, 1 (2). ISSN 2414-5629
Salim Al-Numan, Bayan (2016) Prediction of Time-Dependent Deflection of High Strength Concrete Panels. 2nd International Engineering Conference on Developments in Civil and Computer Engineering Applications.
Salim Al-Numan, Bayan (2019) Proposed Residual Punching Strength-Temperature Relationships for High Strength Concrete Panels Exposed to Elevated Temperatures. Eurasian Journal of Science and Engineering, 4 (4). pp. 68-75. ISSN 24145629
Salim Al-Numan, Bayan (2020) Structural Response of AISC- composite concrete filled circular steel Columns under Lateral Load. ZANCO Journal of Pure and Applied Sciences, 32 (4). pp. 30-37.
Salim Al-Numan, Bayan (2020) Structural Response of AISC-composite concrete filled circular steel Columns underLateral Load. ZANCOJournal of Pure and Applied Sciences, 32 (4). pp. 30-37. ISSN 2218-0230
Salim Al-Numan, Bayan and Kameran Ahmed, Junaid (2019) Effect of Wood-Particles Aggregate Percentage on Some Physical Properties of Concrete. International Conference on Materials Engineering and Characterization. pp. 1-8.
Salim Al-Numan, Bayan and Kameran Ahmed, Junaid (2023) Structural Behavior Of Reinforced Lightweight Concrete Beams Made Of Recycled Wood Aggregates. Eurasian Journal of Science and Engineering, 9 (2). pp. 270-281.
Salim Al-Numan, Bayan and M. Ahmed, Thamir (2016) Sustainability In Construction Projects: Part 1 Elements. Second International Engineering Conference On Developments in Civil & Computer Engineering Applications 2016.
Salim Al-Numan, Bayan and M. Ahmed, Thamir (2016) Sustainability In Construction Projects: Part 2 (Case Studies). Second International Engineering Conference On Developments in Civil & Computer Engineering Applications 2016.
Salim Al-Numan, Bayan and M. Ahmed, Thamir and A. AL-Sakkal, Ghadah (2017) On Involving Infrastructure Topics in the Civil Engineering Department Curriculum-Survey of Graduate Students Views. Eurasian Journal of Science and Engineering, 3 (1). pp. 222-230. ISSN 24145629
Salim Al-Numan, Bayan and S. Abdullah, Caesar (2018) Investigation of a Developed Deflection Control Model of Reinforced Concrete Two Way Slab Systems. Eurasian Journal of Science and Engineering, 4 (1). pp. 18-31. ISSN 24145629
Salim Al-Numan, Bayan and S. Abdullah, Caesar (2018) Modeling Deflection Control of Reinforced Concrete Slab Systems Using Utility Theory and Sensitivity Analysis. Eurasian Journal of Science and Engineering, 3 (3). pp. 21-32. ISSN 24145629
Salim Al-Numan, Bayan and Shahab Ahmed, Razhan (2019) Investigation on Fresh Properties of Concrete Made with Recycled Lightweight Aggregates from Demolished Bricks. Eurasian Journal of Science and Engineering, 5 (1). pp. 48-55. ISSN 24145629
Shaffi Bhat, Suriya and Ishteyaq, Insha (2023) Review Of Compound Semiconductors Relieving Bottlenecks Of Incessant MOSFET Scaling: Heroism Or A Race In The Dark. Eurasian Journal of Science and Engineering, 9 (2).
Star, Stran (2023) Sustainable Architecture: A Solution for Scandinavian Housing Crisis – The Case of Snabba Hus Västberga Stockholm, Sweden. Eurasian Journal of Science and Engineering, 9 (1).
Tahsin, Ala (2020) Data-Driven Techniques for Monthly Pan Evaporation Modeling in Iraq. Eurasian Journal of Science & Engineering, 6 (1). pp. 104-120. ISSN 24145629
Tahsin, Ala (2020) Reference Evapotranspiration Modeling Using Heuristic Computing Model in Distinct Climate Stations. Eurasian Journal of Science & Engineering, 6 (1). pp. 89-103. ISSN 24145629
Turki Haykal, Hamid (2018) Influence of street design characteristics on walkability: Case studies of two neighborhoods in Erbil. ZANCO Journal of Pure and Applied Sciences, 30 (3). pp. 44-55. ISSN 2218-0230
Younus Mustafa, Basil (2018) Hydrological Study and Analysis of Two Farm Dams in Erbil Governorate. Eurasian Journal of Science & Engineering, 3 (3). pp. 177-191. ISSN 2414-5629
Z. Hassan, Hogr and Saeed, Najmadeen and H. Ali, Barham (2023) Optimum Location And Bracing System As Alternative To Shear Walls For Retrofitting Of RC Buildings Against Seismic Loading. Eurasian Journal of Science and Engineering, 9 (2).
